Hardware

Select a page from the navigation tree on the left.

How to enable USB logging on Commend (ID5) intercomDescription This article explains how to start and stop USB logging on a Commend ID5 and intercom station and other MX Device intercom stations. USB logging ca…After some time, the Commend intercom goes out of operation and displays a red illuminated dial button.Symptoms The Commend Intercom stops operation after a firmware update. The call button is turning red and is blocked / not working anymore. Dailing from any ot…Incorrect aspect ration BeeTronics screenSymptoms The PC is using an full HD (1920x1080) image with 16:9 ration, but the image is presented on the BeeTronics display with an 4:3 ratio but using a full…Pololu Maestro Controller not recognised by softwareSymptoms Although the Pololu Maestro Controller is connected to the system (e.g., a CoCoS Client or Sealink Imager), the software on this system is unable to c…